GOLDfren S3 Sintered Sports Brake Pads - GF415S3

The S3 sintered compound is optimal in dry and wet conditions for road andoff-road motorcycles. In road applications S3 pads are suitable for both thefront and rear brake while in off-road applications the S3 is only recommendedfor the front brake.

The S3 series is designed for low abrasive interaction with the rotor andquieter braking due to the ceramic composite material. It has an HH frictionrating and performs better at higher temperatures than the AD compound. Frictionmaterials contain metal-ceramic with a bronze-graphite and non-metallic frictionadditives that are spread evenly on the base fine bronze body to achieve optimalfriction properties.

Features:

• Very high static friction coefficient.
• Minimal difference between wet and dry braking performance.
• Good abrasive resistance.
• Low abrasive interaction with the brake rotor material.
• Longer life compared to organic and Kevlar composite materials.

Application:

• For riders who demand a bit more than average from their bikes.
• Recommended on both front and rear brakes (road application).
• Can also be used on the front brakes of off-road bikes and ATVs.
• Works well on both dry and wet conditions.

Operating Parameters:

• Specific pressure: 3.0 Mpa
• Sliding speed: 45 m/s
• Constant maximum temp: 450°C
• Short time maximum temp: 800°C
• Counter-surfaces: steel disks

What is a sintered brake pad?

GOLDfren only manufactures sintered brake pads that contain metal-ceramic andceramic-carbon friction materials. These materials allow less brake dust and aquieter braking experience. Sintered brake pads are made by fusing togethermetallic particles under high temperature and pressure which enhances frictionproperties and pad life resulting in longer life and stronger braking. Sinteredbrak